Clear water ready for daily swimming
Chemically balanced water without skin irritation
Maintaining pH between 7.2 and 7.6 alongside correct sanitiser levels prevents chlorine lock, burning eyes, and rapid algae blooms. Balanced chemistry preserves pool plaster, grouting, and internal ladder fittings across every season.
Clean waterline tiles free from scale
Brushing tile bands and controlling hardness prevents grey mineral lines from welding onto ceramic borders. Skimmer throats and tile lines remain smooth, clean, and free of oily residue.
Reliable pumps and clear filtration media
Regular backwashing and strainer clearing prevent excessive operating pressures that crack multiport valves or overheat pump motors. Circulation equipment runs smoothly through the hottest months without unexpected breakdowns.
Pool cleaning and maintenance in the Costa del SolLeaving water untended under summer heat turns clear basins into opaque green swamps within seventy-two hours. Algae spores settle deep into cementitious grout joints, requiring aggressive manual scrubbing and expensive chemical shock treatments to lift.
Fine airborne calima sand from North African storms settles across the pool bottom and packs tight inside filter media. Pumps running against clogged filtration overheat motors and melt seals. This often causes emergency pump replacements during peak heat in Benalmádena.
Hard tap water evaporates under direct sun, baking thick calcium scale along waterline mosaic tiles. Neglecting scale leaves chalky bands that trap oils and etch tile glazes permanently.
The sequence that keeps water clear
Water chemistry is tested — Photometer testing measures free chlorine, combined chlorine, and pH levels to determine accurate chemical requirements. Testing establishes baseline parameters before any treatment begins.
Surface debris is skimmed — Heavy leaf nets clear pine needles, insects, and floating plant matter before organic material settles.
Waterline tiles are brushed — Stiff nylon brushes remove body oils, pollen, and early scale along the waterline and skimmer mouths. Agitating surfaces prevents algae from taking hold in microscopic grout pores.
The pool floor is vacuumed — Suction equipment extracts fine calima dust and settled sediment directly out of the pool basin. Vacuuming to waste prevents heavy silt from clogging the main filter tank during dusty weather.
Baskets are emptied and cleared — Skimmer baskets and pump pre-filter strainer pots are cleared of accumulated leaves, stones, and coarse debris. Clean baskets maintain steady water flow and prevent cavitation.
The filter media is backwashed — Reversing water flow through media flushes trapped dirt and silt out through the waste line. A subsequent rinse cycle repacks the bed so expelled sand cannot return into the pool returns.
Balancing chemicals are dosed — Measured doses of liquid pH adjusters and sanitiser are added directly to restore water parameters.
We cover the Costa del Sol
Service routes cover detached private villas across coastal communities and hillside estates.
Your questions, answered
How often does a villa pool require service visits? +
Weekly visits are standard through the year to hold water chemistry stable and skim debris. In peak summer the water evaporates fast and algae multiplies quickly, so the weekly check matters most then. Through winter the rhythm is set for the property, depending on tree cover and storm activity.
Are water treatment chemicals included in the regular maintenance? +
Standard balancing products such as chlorine, pH reducers, and basic clarifiers are managed as part of the scheduled upkeep. Specialty chemicals for severe staining, phosphate removal, or flocculant treatments are logged on the service sheet and billed separately.
What happens after a calima dust storm hits the area? +
Fine Sahara sand settles on the pool floor and turns the water cloudy within hours. The basin floor is vacuumed straight to waste to bypass the filter bed. An immediate backwash cycle follows to prevent media compaction, and chemicals are adjusted for atmospheric dust.
How is pool maintenance managed when the property sits empty? +
Scheduled service continues on a fixed day without an owner present, provided terraces and plant rooms remain accessible. Each visit is recorded in an inspection log detailing water chemistry readings and work completed. Any pump anomalies or pipe leaks are flagged immediately.
Can salt chlorination systems run without manual chemical additions? +
Salt cells produce natural chlorine, but they do not regulate water pH or mineral scale. Hard water causes salt cells to scale up quickly. This requires regular acid cleaning of the titanium plates to maintain proper output. Salt levels must also be tested and topped up after rain.
Does routine cleaning prevent calcium scale on mosaic tiles? +
Consistent pH management stops dissolved calcium from precipitating onto mosaic tiles and grout lines. Waterline brushing removes soft mineral deposits before sunshine bakes them into hard crusts. Once heavy scale forms, manual descaling using specialist gel is required.
What happens if there is an issue or dissatisfaction with a visit? +
Say so, and the pool is looked at again. Basin chemistry is retested and filtration performance is verified, and whatever was missed is put right.